Linksys SPA8000 Analog Adapter / VoIP Gateway
Ports: 8 FXS + 1 RJ45 + 1 RJ21
Supported Protocols: SIP
Status: Unlocked

SPA8000 Product Description

The Linksys SPA8000 8-Port IP Telephony Gateway is a full featured Analog Terminal Adapter (ATA) for small business enterprises providing enhanced communication services via a broadband connection to the Internet. The SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multi-port RJ-21 50-pin connector offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100Base-T RJ-45 Ethernet interface to connect to either a router or multilayer switch.

Solid in design, the SPA8000 is an affordable solution that is ideally suited for use in business and consumer VoIP service offerings including call centers and multi-dwelling environments. Customers can also protect and extend their investments by continuing to utilize their existing analog telephones and teleconferencing equipment. Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA8000 converts voice traffic into data packets for transmission over an IP network and uses common standards for voice and data networking for reliable voice and fax operation.

Security

Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
- HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Authentication: EAP-TLS, EAP-TTLS, and EAP-PEAP
SIP TLS (Transport Layer Security)
Up to 256-bit AES Encryption

Provisioning, Administration & Maintenance

Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records
Per Line and Purpose Configurable Syslog and Debug Options


Physical Interfaces

8 port standard FXS voice ports (RJ-11)
RJ-21 (50-pin telco connector) multi-port voice connection
1 WAN 100baseT RJ-45 Ethernet Port (IEEE 802.3)
Reset button


Subscriber Line Interface Circuit (SLIC)

Ring Voltage: 40-90 Vpk Configurable
Ring Frequency: 20 Hz - 25 Hz
Ring Waveform: Trapezoidal
Maximum Ringer Load: 5 REN
On-hook/off-hook Characteristics:
- On-hook voltage (tip/ring): -46 ~ -56V
- Off-hook current: 18-25 mA
- Terminating Impedance: 600 ohm resistive or 270 ohm + 750ohm//
150nF complex impedance
Frequency Response 300 – 3400Hz
Return Loss (600 ohm, 300-3400Hz) Up to 20dB
Insertion Loss (1 Vrms @1 kHz) 3dB – 4dB
THD (350 mV peak @ 300 Hz) Up to 3%
Idle Channel Noise -72 dB (typ.)
Longitudinal Balance 55 dB (typ.)
Off Hook Threshold (Line Seizure) Rdc < 1000 ohm
On Hook Threshold (Line Release) Rdc >10000 ohm
Rdc DC Supervisory Range Rdc > 450 ohm

Regulatory Compliance

FCC (Part 15 Class B), CE, ICES-003, C-Tick Certification, RoHS, UL


Power Supply

Switching Type (100-240v) Automatic
DC Input Voltage: 12V DC at 3.0 A Max.
Power Adapter: 100-240v - 50-60Hz AC Input


Indicator Lights/LED

Power, Ethernet, USB, Voice Status, Phone 1,2,3,4,5,6,7,8


Documentation

Quick Installation, User, and Configuration Guides are downloaded from www.Linksys.com
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only

Environmental

Dimensions 6.69 x 1.54 x 8.66” (170 x 39 x 220 mm) W x H x D
Weight 2.85 lbs (1.30 kg)
Operating Temp. 32 to 113°F (0°C to 45°C)
Storage Temp. -13 to 185°F (-20°C to 85°Operating Humidity 10% to 90% Non-Condensing, operating and non-operating
Storage Humidity 10% to 90% Non-Condensing, operating and non-operating